66 Command Groups
ACL
show authentication
methods
Shows information about authentication
methods
PE
show user accounts Displays information about the local user
database
PE
show users login-history Displays information about login histories of
users
PE
username Establishes a username-based authentication
system.
GC
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command Description Mode*
access-list Creates an Access Control List (ACL) that is
identified by the parameter
accesslistnumber.
GC
deny|permit The deny command denies traffic if the
conditions defined in the deny statement are
matched. The permit command allows traffic if
the conditions defined in the permit statement
are matched.
ML
ip access-group Attaches a specified access-control list to an
interface.
GC or
IC
ip access-group <name>
out
Applies an IP based egress ACL on an Ethernet
interface or a group of interfaces.
IC
mac access-group Attaches a specific MAC Access Control List
(ACL) to an interface in a given direction.
GC or
IC
mac access-list extended Creates the MAC Access Control List (ACL)
identified by the
name
parameter.
GC
mac access-list extended
rename
Renames the existing MAC Access Control List
(ACL) name.
GC
Command Description Mode*
