Ethernet Configuration Commands 307
show interfaces status
Use the show interfaces status command in User EXEC mode to display the
status for all configured interfaces.
Syntax
show interfaces status [ethernet
interface
| port-channel
port-channel-
number
]
•
interface
— A valid Ethernet port.
•
port-channel-number —
A valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the status for all configured interfaces.
console#show interfaces status
Port Type Duplex Speed Neg Link Flow Control
State Status
----- ----------------- ------ ------- ---- ----- -----
1/g1 Gigabit - Level N/A Unknown Auto Down Inactive
1/g2 Gigabit - Level N/A Unknown Auto Down Inactive
1/g3 Gigabit - Level N/A Unknown Auto Down Inactive
1/g4 Gigabit - Level N/A Unknown Auto Down Inactive
1/g5 Gigabit - Level N/A Unknown Auto Down Inactive
1/g6 Gigabit - Level N/A Unknown Auto Down Inactive
1/g7 Gigabit - Level N/A Unknown Auto Down Inactive
1/g8 Gigabit - Level N/A Unknown Auto Down Inactive
