DeLonghi ECAM26455 Manual

Open as PDF

next previous

MENU SETTINGS

When you access the programming menu by pressing the MENU/ESC

button, the following menu items are available:

Rinsing

Use this function to deliver hot water from the spout to heat the internal

circuit and make the coee delivered hotter.

To enable the function, proceed as follows:

1. Press the MENU/ESC button to enter the menu;

2. Press the HOT MILK or LATTE button (g. 8) until “Rinsing”

is displayed;

3. Press the

button. The message “Conrm?” is

displayed;

3. Press the

button (g. 3). Hot water ows out of

the spout, heating the internal circuit and making the

coee delivered hotter.

Descale

For instructions on descaling, see page 17.

Adjust time

To adjust the time on the display, proceed as follows:

1. Press the MENU/ESC button to enter the menu;

2. Press the HOT MILK or LATTE button (g. 8) until “Adjust

time” is displayed;

3. Press the

button (g. 3);

4. Press the HOT MILK or LATTE button (g. 8) to change

the hours;

5. Press the

button to conrm;

6. Press the HOT MILK or LATTE button (g. 8) to change

the minutes;

7. Press the

button to conrm.

This sets the time. Press the MENU/ESC button to exit the menu.

Auto-o

The appliance is set to turn o automatically if not used for 2

hours.

The time can be changed so that the appliance switches o

after 15 or 30 minutes, or after 1, 2 or 3 hours.

To re-programme Auto-o, proceed as follows:

1. Press the MENU/ESC button to enter the menu;

2. Press the HOT MILK or LATTE button (g. 8) until “Auto-

o” is displayed;

3. Press the

button;

4. Press the HOT MILK or LATTE button (g. 8) until the

desired operation time is displayed (15 or 30 minutes, or

1, 2 or 3 hours);

5. Press the

button to conrm;

6. Press the MENU/ESC button to exit the menu.

Auto-o is programmed.

Auto-start

You can set the auto-start time in order to have the appliance

ready at a certain time (for example in the morning) so you can

make coee immediately.

Please note!

To enable this function, the time must already have been set

correctly.

To enable Auto-on, proceed as follows:

1. Press the MENU/ESC button to enter the menu;

2. Press the HOT MILK or LATTE button (g. 8) until “Auto-

start” is displayed;

3. Press the

button. “Enable?” is displayed;

4. Press the

button to conrm;

Press the

HOT MILK or LATTE

button to choose the hours;

6. Press the button to conrm;

7. Press the HOT MILK or LATTE button (g. 8) to change

the minutes;

8. Press the

button to conrm;

9. Press the MENU/ESC button to exit the menu.

Once the time has been conrmed, enabling of auto-start is

indicated by the

symbol displayed alongside the time

and under the Auto-start item in the menu.

To disable the function:

1. Select auto-start from the menu;

2. Press the

button. “Disable?” is displayed;

3. Press the

button to conrm.

The

symbol is no longer displayed.

Setting the temperature

To modify the temperature of the water used to make the

coee, proceed as follows:

1. Press the MENU/ESC button to enter the menu;

2. Press the HOT MILK or LATTE button (g. 8) until “Set

temperature” is displayed;

3. Press the

button;

4. Press the HOT MILK or LATTE button until the required

temperature (●= low, ●●●● = high) is displayed;

5. Press the

button to conrm;

6. Press the MENU/ESC button to exit the menu.

Energy Saving

Use this function to enable or disable energy saving mode.

When enabled, the function reduces energy consumption in

compliance with European regulations. To disable (or enable)

“energy saving” mode, proceed as follows:

1. Press the MENU/ESC button to enter the menu;

2. Press the HOT MILK or LATTE button (g. 8) until “Energy

saving” is displayed;

3. Press the

button. “Disable?” is displayed (or