19
10. The message “Enable?” is displayed.
11. Press the
button to conrm the selection. “Hot
water Conrm?” is displayed.
12. Position a container with a minimum capacity of 100 ml
under the hot water spout.
13. Press the
button to conrm the selection. The
appliance begins delivering hot water and the message
“Please wait... “ is displayed.
14. After delivery, the appliance returns automatically to the
“Ready for coee” position.
The new lter is active. You can now use the coee maker.
Replacing the lter
When “REPLACE FILTER” is displayed, after two months (see
date indicator) or when the appliance has not been used for 3
weeks, you should replace the lter:
1. Remove the exhausted lter;
2. Remove the new lter from the packaging.
3. Turn the date indicator disk (see g. 33) until the next 2
months of use are displayed (the lter lasts about two
months);
4. Rell the tank;
5. Insert the lter in the water tank and immerse it
completely, tilting it to enable the air bubbles to escape
(g. 34);
6. Place the lter in the lter housing (g. 35aa) and press as
far as it will go. close the tank with the lid (g. 35b), then
replace the tank in the machine;
7. Position a container with a minimum capacity of 100 ml
under the hot water spout.
8. Press the MENU/ESC button to enter the menu;
9. Press the MILK or CAPPUCCINO button until “Replace
lter “ is displayed.
10. Press the
button;
11. The message “Conrm?” is displayed.
12. Press the
button to conrm the selection;
13. “Hot water… Conrm?” is displayed.
14. Press the
button to conrm the selection. the
appliance begins delivering hot water and the message
“Please wait “ is displayed.
15. After delivery, the appliance returns automatically to the
“ready for coee” position.
The new lter is now active and you can use the coee maker.
Removing the lter
If you want to continue using the appliance without a lter,
you must remove it and notify the appliance of its removal as
follows:
1. Extract the tank and exhausted lter;
2. Press the MENU/ESC button to enter the menu;
3. Press the MILK or CAPPUCCINO button (g. 8) until
“Install lter Enabled” is displayed;
4. Press the
button
5. “Disable?” is displayed;
6. Press the
button to conrm and the MENU/ESC
button to exit the menu.
TECHNICAL SPECIFICATION
7PMUBHF 7_)[NBY"
Absorbed power: 1450W
Pressure: 15 bar
Water tank capacity: 2.0 litres max.
Size Lxhxd: 238x350x445 mm
Cable length: 1.80 m
Weight: 11.8 kg
Beans container capacity: 250 g max.
The appliance complies with the following EC
directives:
t 4UBOECZ%JSFDUJWFOP
t -PX 7PMUBHF %JSFDUJWF &$ BOE TVCTFRVFOU
amendments;
t &.$EJSFDUJWF&$BOETVCTFRVFOUBNFOENFOUT
t .BUFSJBMTBOEBDDFTTPSJFTDPNJOHJOUPDPOUBDUXJUIGPPE
conform to eec regulation 1935/2004.
DISPOSAL
Important information for correct disposal of the
product in accordance with EC Directive 2002/96/EC.
At the end of its working life, the product must not
be disposed of as urban waste. It must be taken to
a special local authority dierentiated waste collection centre
or to a dealer providing this service. Disposing of a household
appliance separately avoids possible negative consequences
for the environment and health deriving from inappropriate
disposal and enables the constituent materials to be recovered
to obtain signicant savings in energy and resources.As a
reminder of the need to dispose of household appliances
separately, the product is marked with a crossed-out wheeled
dustbin.
