EPSON EPL-N2700 Rev. A
Chapter 4 Disassembly/Assembly 127
4.2.23.4 Paper Size (Paper Size Switch) Sensor Removal
1. Take out the Cassette 1.
2. Separate the printer. (See Section 4.2.6.)
3. Remove three screw (3704) securing the bracket for the Paper Size
Sensor to the frame in the Cassette 1 and remove the Paper Size
Sensor along with the bracket.
4. Remove one screw (3501) securing the Paper Size Sensor Cover to
the bracket and remove the Paper Size Sensor Cover from the
bracket.
5. Release the hook attaching the Paper Size Sensor to the bracket at
the inner side and remove the Paper Size Sensor from the bracket.
6. Remove the harness from the Paper Size Sensor.
Figure 4-63. Paper Size Sensor Removal
4.2.23.5 Cassette 1 Control Board (PWB-A) Removal
1. Take out the Cassette 1.
2. Separate the printer. (See Section 4.2.6.)
3. Remove harnesses from the connectors on the Cassette 1 Control
Board.
4. Remove two screws (3501) securing the Cassette 1 Control Board
to the bracket and bracket support and remove the Cassette 1
Control Board.
Figure 4-64. Cassette 1 Control Board Removal
