A SERVICE OF

logo

Service Tests and Utilities
4-31
HP DesignJets 1050C and 1055CM Printers Service Manual
12 The Printer will start to print the Printhead Alignment Pattern and
the following message will be displayed on the front panel:
13 Once the Printhead Alignment is completed, the following message
will be displayed on the front panel:
WARNING Since you have replaced the Tubes System, make sure that you
perform the Calibrations Backup (Page 5-19) in order to
backup the EEROM Data from the Electronics Module. Make
sure you select "Tubes Replaced" when performing the
Calibrations Backup.
Approximate
Aligning printheads
INK STARTUP
time remaining
x min xx sec
INK STARTUP
Printer startup
Press Enter to
Continue
has finished
To p
Enter
Back
Press Enter