more snugly against the body. Seat belt force
limiters, when activated, are employed to
help reduce the peak force exerted by the
seat belts on occupants during a crash.
i
The ETDs do not correct an incorrect seat
position or incorrectly worn seat belts.
The ETDs do not pull occupants back
toward the seat backrest.
G
Warning!
Pyrotechnic ETDs that were activated must be
replaced.
For your safety, when disposing of the
pyrotechnic ETDs always follow our safety
instructions. These are available at any
authorized Mercedes-Benz Center.
Correct driver seat adjustment
G
Warning!
In order to avoid possible loss of vehicle
control the following must be done before the
vehicle is put into motion:
R
seat adjustment
R
steering wheel adjustment
R
rear view mirror adjustment
R
fastening of seat belts
Steering wheel
G
Observe Safety notes, see page 245.
X
Position steering wheel : properly.
Make sure:
R
You can reach the steering wheel with your
arms slightly bent at the elbows.
R
You can move your legs freely.
R
All displays (including malfunction and
indicator lamps) on the instrument cluster
are clearly visible.
Seat belt
G
Observe Safety notes, see page 52.
X
Fasten and position your seat belt ;
correctly (Y page 54).
Make sure:
R
The seat belt is always fitted snugly.
R
Adjust the seat belt so that the shoulder
section is located as close as possible to
the middle of the shoulder.
R
Place the lap portion of the seat belt as low
as possible on your hips.
56
Occupant safety
Safety and security
BA 197 USA, CA Edition A 2011; 1; 27, en-US
hereepe Version: 3.0.3.5
2010-03-24T15:31:10+01:00 - Seite 56
