After theheadlights automatically turnoff withthe
headlight switch in the or position,
the headlights willilluminate again for5 minutes if
the headlightswitch ismoved tothe OFFposition
and then turned to the
or position.
CAUTION
Even though the battery saver feature au-
tomatically turns off the headlights after a
period of time, you should turn the head-
light switch to the OFF position when the
engine is not running to avoid discharging
the vehicle battery.
DAYTIME RUNNING LIGHT SYSTEM
(Canada only)
The headlights automatically illuminate at a re-
duced intensity when the engine is started with
the parking brake released. The daytime running
lights operate with the headlight switch in the
OFF position or in the
position. Turn the
headlight switch to the
position for full
illumination when driving at night.
If theparking brakeis appliedbefore theengine is
started, the daytime running lights do not illumi-
nate. The daytime running lights illuminate when
the parking brake is released. The daytime run-
ning lights will remain on until the ignition switch
is placed in the OFF position.
WARNING
When the daytime running light system is
active, tail lights on your vehicle are not
on. It is necessary at dusk to turn on your
headlights. Failure to do so could cause
an accident injuring yourself and others.
INSTRUMENT BRIGHTNESS
CONTROL
The instrumentbrightness control operateswhen
the headlight control switch is in
the
, or AUTO position (with auto-
lights activated).
Turnthe control
᭺
1
to adjustthe brightness ofthe
instrument panel lights when driving atnight. The
brightness indicator
᭺
2
will illuminate in the
odometer when the control is turned. The indica-
tor will turn off a few seconds after the control is
released.
LIC0936
Instruments and controls 2-21
੬ REVIEW COPY—
2009 Quest (van)
Owners Manual—USA_English (nna)
07/17/08—debbie
੭
