● Average Speed - Average speed driven
(MPH or km/h) since the last reset.
Resetting trip 1 and trip 2
Each tripscreencan bereset to0. Pressthe TRIP
button to select the TRIP screen to be reset.
● Select the “Reset” key on screen by press-
ing the ENTER button, or
● Press theTRIP buttonfor more thanapproxi-
mately 1.5 seconds.
Fuel economy
Press the TRIP button to display Average Fuel
Economy and Distance To Empty.
Average fuel economy (MPG or L/100 km)
The Average Fuel Economy is calculated based
on fuel consumption since the last reset. The
display is updated every 30 seconds and 1/3
mile (500 m). After a reset or connecting the
battery cables, the display will show (**.*).
Resetting fuel economy
The average fuel economy calculation can be
reset to 0. Press the TRIP button repeatedly until
the FUEL ECONOMY menu is shown, then ei-
ther:
● Select the “Reset” key on screen by press-
ing the ENTER button, or
● Press theTRIP buttonfor more thanapproxi-
mately 1.5 seconds.
Distance to empty (MI or km)
The Distance To Empty (DTE) modeprovides you
with an estimation of the distance that can be
driven before refueling. The DTE is constantly
calculated based on the amount of fuel in the fuel
tank and theactual fuel consumption. Thedisplay
is updated every30 seconds. When thefuel level
is low, the DTE display will change to (*).
NOTE:
● If the amount of fuel added while the ignition
switch isOFF issmall, thedisplay just before
the ignition switch is turned OFF may con-
tinue to be displayed.
● When driving uphill or rounding curves, the
fuel inthe tankshifts, whichmay momentarily
change the display.
LHA0553
4-20 Display screen, heater, air conditioner, audio and phone systems
੬ REVIEW COPY—
2009 Quest (van)
Owners Manual—USA_English (nna)
07/17/08—debbie
੭
