6. The systemasks you to assigna priority level
᭺
F
. The priority level determines which
phone is active when more than one paired
Bluetoothா phone is in the vehicle. Follow
the instructions provided by the system or
refer to “Setup”later in this section for more
information on changing priorities.
7. The systemwill ask ifyou would liketo select
a custom ring tone
᭺
G
. Follow the instruc-
tions provided by the system or refer to
“Setup” later in this section for more infor-
mation on selecting ringtones.
Making a call by entering a phone
number
Main Menu
“Call”
᭺
A
Number (speak digits)
᭺
B
“Dial”
᭺
C
1. Press the button on the steering
wheel. A tone will sound.
2. Say: “Call”
᭺
A
. The system acknowledges
the command and announces the next set of
available commands.
Say: “Call International”to dial more than 10
digits or any special characters.
3. Say the numberyou wish to call starting with
the area code in single digit format
᭺
B
.Ifthe
system has trouble recognizing the correct
phone number, try entering the number in
the following groups: 3-digit area code,
3-digit prefix and the last 4-digits. For ex-
ample, 555-121-3354 can be said as “five
five five” as the 1st group, then “one two
one” as the 2nd group, and “three three five
four”as the 3rd group. For dialing more than
10 digits or any special characters, say “In-
ternational”. See “How to say numbers”ear-
lier in this section, for more information.
4. When you have finishedspeaking the phone
number, the system repeats it back and an-
nounces the available commands.
5. Say: “Dial”
᭺
C
. The system acknowledges
the command and makes the call.
For additional command options, see “List of
voice commands” later in this section.
Receiving a call
When you hear the ring tone, press the
button on the steering wheel.
Once the call has ended, press the
button
on the steering wheel.
NOTE:
If you do not wish to take the call when you
hear the ring tone, press the
button
on the steering wheel.
For additional command options, see “List of
voice commands” later in this section.
LIST OF VOICE COMMANDS
Main Menu
“Call” or “Call International”
“Phone Book”
“Memo Pad”
“Setup”
When youpress and release the button on
the steering wheel, you can choose from the
commands on the Main Menu. The following
pages describe these commands and the com-
mands in each sub-menu.
Remember to wait for the tone before
speaking.
You can say “Help” to hear the list of commands
currently available any time the system is waiting
for a response.
If youwant to end anaction without completingit,
you can say “Cancel” or “Quit” at any time the
system is waiting for a response. The system will
4-84 Display screen, heater, air conditioner, audio and phone systems
੬ REVIEW COPY—
2009 Quest (van)
Owners Manual—USA_English (nna)
07/17/08—debbie
੭
