![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/f/6a/f6acb7dd-4265-42a2-899a-3844e1622325/f6acb7dd-4265-42a2-899a-3844e1622325-bgc4.png)
Podcast:
ALL RPT ←→ TRK RPT
For more information about Podcasts, see the
iPodா owner’s manual.
Audiobook:
NORMAL → FAST → SLOW
iPodா* PLAYER OPERATION WITH
NAVIGATION SYSTEM (if so
equipped)
Connecting iPodா
To connect an iPodா to the vehicle so that the
iPodா can be controlled with the audio system
controls and display screen, use the USB jack
located in the center console. Open the protec-
tive cover on the USB jack in the center console
and then connect the iPodா-specific end of the
cable to the iPodா and the USB end of the cable
to the USB jack on the vehicle
᭺
1
. If your iPodா
supports charging via a USB connection, its bat-
tery will be charged while connected to the ve-
hicle with the ignition switch in the ACC or ON
position.
While connected to the vehicle, the iPodா can
only be operated by the vehicle audio controls.
To disconnect theiPodா fromthe vehicle, remove
the USB end of the cable from the USB jack on
the vehicle, then remove the cable from the
iPodா.
*iPodா is a trademark of Apple Inc., registered in
the U.S. and other countries.
Compatibility
The following models are compatible:
● iPodா Classic - 5th generation
● iPodா Nano - 1st through 2nd generation
Make sure that your iPodா firmware is updated to
the version indicated above.
LHA1498
Display screen, heater, air conditioner, audio and phone systems 4-49