POWER on switch
With the ignition switch in the ACC or ON posi-
tion, push the POWER switch to turn the audio
system on.
SOURCE select switch (models
without Navigation System)
Push the SOURCE select switch to change the
mode in the following sequence: PRESET A →
PRESET B → PRESET C → PRESET A.
With a CD inserted and an auxiliary device
plugged in, push the SOURCE select switch to
change the mode in the following sequence: CD
→ AUX → PRESET A → PRESET B → PRESET
C → CD.
While in one of the preset radio station banks (A,
B or C), use the tuning switch
or to
select one of the preset radio stations (1–6).
SOURCE select switch (models with
Navigation System)
Push the SOURCE select switch to change the
audio modeinthe followingsequence: AM/FM→
XM → CD* → USB/AUX* → AM/FM.
* These modes are only available when compat-
ible media storage is inserted into the device.
Volume control switch
Push the volume control switch to increase or
decrease the volume.
Tuning
Memory change (radio):
While in one of the preset radio station banks (A,
B or C), push the tuning switch
or
for less than 1.5 seconds to change to the next
preset station in memory.
Seek tuning (radio):
Push the tuning switch
or for more
than 1.5 seconds to seek the next or previous
radio station.
Next/Previous track (CD):
Push the tuning switch
or for less
than 1.5seconds toreturn to thebeginning ofthe
present track or skip to the next track. Push
several times to skip back or skip through tracks.
Change disc (CD) (if so equipped):
Push the tuning switch
or for more
than 1.5 seconds to change the playing disc up
or down.
ANTENNA
The antenna should be placed in the rearward
position
᭺
1
for maximum radio reception.
LHA0708
4-54 Display screen, heater, air conditioner, audio and phone systems
