A SERVICE OF

logo

Open as PDF
next previous
13 – Command Reference
Set Port
13-82 59183-01 A
S
Set Port
Sets port state and speed for the specified port temporarily until the next switch
reset or new configuration activation. This command also clears port counters.
Authority Admin session
Syntax set port clear
or
set port [port_number]
bypass [alpa]
clear
enable
speed [transmission_speed]
state [state]
Keywords [port_number]
Specifies the port. Ports are numbered beginning with 0.
bypass [alpa]
Sends a Loop Port Bypass (LPB) to a specific Arbitrated Loop Physical Address
(ALPA) or to all ALPAs on the arbitrated loop. [alpa] can be a specific ALPA or the
keyword ALL to choose all ALPAs.
clear
Clears the counters on all ports or the port given by [port_number].
enable
Sends a Loop Port Enable (LPE) to all ALPAs on the arbitrated loop.