13 – Command Reference
Set Setup Services
59183-01 A 13-87
A
Set Setup Services
Configures services on the switch.
Authority Admin session
Syntax set setup services
Prompts you in a line-by-line fashion to enable or disable switch services.
Table 13-21 describes the switch service parameters. For each parameter, enter a
new value or press the Enter key to accept the current value shown in brackets.
NOTE: Use caution when disabling TelnetEnabled and GUIMgmtEnabled; it is
possible to disable all Ethernet access to the switch.
Table 13-21. Switch Services Settings
Entry Description
TelnetEnabled Enables (True) or disables (False) the ability to manage
the switch over a Telnet connection. Disabling this service
is not recommended. The default is True.
SSHEnabled Enables (True) or disables (False) Secure Shell (SSH)
connections to the switch. SSH secures the remote con-
nection to the switch. To establish a secure remote connec-
tion, your workstation must use an SSH client. The default
is False.
The SSH service requires the Fabric Security license key
To purchase a license key, contact your authorized mainte-
nance provider or authorized reseller.
GUIMgmtEnabled Enables (True) or disables (False) out-of-band manage-
ment of the switch with Enterprise Fabric Suite 2007, the
Application Programming Interface, SNMP, and SMI-S. If
this service is disabled, the switch can only be managed
inband or through the serial port. The default is True.
