Getting connected
190
1. From the
Start
menu, tap
Settings
→
Connections
tab
→
Wi-Fi
→
Add New...
2. Enter a network name and select a network type.
3. Select
This is a device to device (ad-hoc)
connection
and tap
Next
.
If you do not select this option, the network is added as
an access point, and the phone is not able to connect to
the network.
4. Set authentication options and tap
Next
.
5. Enter a network key, set an index number for the key,
and tap
Next
.
6. Set whether to use IEEE 802.1x network access control
select an EAP type, and tap
Finish
.
The network is added to the available network list.
Managing Wi-Fi networks
From the available Wi-Fi network list, you can check the
status of the networks you have saved and change a
network’s properties.
On the list, the following icons may appear to indicate the
device status.
• : Secured access point connection
• : Ad Hoc (Device to Device) connection
• : Access point connection
Tap
Menu
and select
Edit
to change the network
properties or
Remove Settings
to remove the network
from the list.
