49
Playback
Chapter 3 Recording and Playback
5
Press the m button to select REPEAT TOP.
6
Press the ,/B button.
The display changes as follows.
7
Press the m button to select A POINT.
8
Press the </A button.
The display changes as follows.
9
Press the m button to select A PRESET.
10
Press the ,/B button.
The A PRESET MODE screen appears. The timecode
value of the current point A is displayed below the
screen title.
11
Press the </A or ,/B button to select the digit in
the timecode value display that you want to change.
Each press of the button causes the digit to the left or
right to begin flashing.
Holding the button down moves the flashing digit
continuously.
If you want to clear the timecode value, press the
RESET (NO) button. The value is cleared to
00:00:00:00, and the leftmost digit begins flashing.
12
Press the M or m button to increment or decrement the
value of the flashing digit.
Each press of the button increments or decrements the
value. Holding the button down increments or
decrements the value continuously. To change other
digits, return to step 11.
13
Press the SET (YES) button to confirm the defined
value.
The message “NOW SAVING...” is displayed on the
monitor screen and “Saving...” is shown in the time
counter display while the new setting is being saved in
memory.
The new setting may be lost if you power off the unit
during the saving operation. Wait until the saving
operation is completed before powering the unit off.
>> REPEAT MD
SETUP MENU
OPERATIONAL FUNCTION
REPEAT FUNCTION
REPEAT MODE
REPEAT TOP
REPEAT END
A PRESET
B PRESET
:OFF
:T.TOP
:V.END
Monitor screen
Time counter display
>> REP TOP
SETUP MENU
OPERATIONAL FUNCTION
REPEAT FUNCTION
REPEAT MODE
REPEAT TOP
REPEAT END
A PRESET
B PRESET
:OFF
:T.TOP
:V.END
Monitor screen
Time counter display
>>> Tape top
SETUP MENU
OPERATIONAL FUNCTION
REPEAT FUNCTION
REPEAT TOP
* TAPE TOP
A POINT
:T.TOP
Monitor screen
Time counter display
>>> A point
SETUP MENU
OPERATIONAL FUNCTION
REPEAT FUNCTION
REPEAT TOP
* TAPE TOP
A POINT
:T.TOP
Monitor screen
Time counter display
>> REP TOP
SETUP MENU
OPERATIONAL FUNCTION
REPEAT FUNCTION
REPEAT MODE
REPEAT TOP
REPEAT END
A PRESET
B PRESET
:OFF
:A
:V.END
Monitor screen
Time counter display
Caution
>> A preset
SETUP MENU
OPERATIONAL FUNCTION
REPEAT FUNCTION
REPEAT MODE
REPEAT TOP
REPEAT END
A PRESET
B PRESET
:OFF
:A
:V.END
Monitor screen
Time counter display
00:00:00:00
A PRESET MODE
A 00:00:00:00
REPEAT TOP
INC/DEC : ( )( )KEY
SHIFT : ( )( )KEY
CLEAR : RESET KEY
DATA SAVE : SET KEY
TO MENU : MENU KEY
Monitor screen
Time counter display
