67
Digital Dubbing
Chapter 6 Using the i.LINK Connector for Dubbing and TC Insert
When carrying out A/V/TC/CM dubbing, if you press the
STOP button to stop dubbing in step 8, or if dubbing stops
because the source tape is longer than the recording tape,
the above message appears to confirm whether or not to
copy the contents of the cassette memory.
To copy the contents of the cassette memory, press the
SET (YES) button.
If you do not wish to copy the contents of the cassette
memory, press the RESET (NO) button. If you press the
RESET (NO) button, however, the contents of the cassette
memory may not agree with the material recorded on the
tape.
If a fault or unsupported format is detected on the
player
When you carry out step 8 of the foregoing procedure, the
following messages appear.
• Message example 1
During execution
After execution
• Message example 2
During execution
After execution
i.LINK DUBBING :HDV
(A/V/TC/CM)
EXECUTING.
TCR 00:03.58.10
UBR 00:00.00.00
PLAYER VTR'S SERVO
UNLOCKED.
ABORT: MENU KEY
Executing
Monitor screen
Time counter display
SV unlocked
i.LINK DUBBING :HDV
(A/V/TC/CM)
DUBBING COMPLETED.
HOWEVER, PLAYER VTR'S
SERVO UNLOCKED
DURING DUBBING.
PUSH THE SET BUTTON.
ABORT: MENU KEY
Monitor screen
Time counter display
i.LINK DUBBING :HDV
(A/V/TC/CM)
EXECUTING.
TCR 00:02.57.14
UBR 00:00.00.00
NON HDV 1080i FORMAT
SOURCE.
ABORT: MENU KEY
Executing
Monitor screen
Time counter display
i.LINK DUBBING :HDV
(A/V/TC/CM)
DUBBING COMPLETED.
HOWEVER, A NON HDV 1080i
FORMAT SEGMENT
WAS ON THE SOURCE TAPE.
PUSH THE SET BUTTON.
ABORT: MENU KEY
ILL format
Monitor screen
Time counter display
