COOKING IN ONE CYCLE
Follow these steps to cook at one power level:
HIGH COOK POWER
DO THIS...
THIS HAPPENS...
1.
Put tood in the oven and
close the door.
The COCK CYCLE 1 Signal Light will come
on and the Display will show four 0’s.
The Display will show the numbers you
touched in the order you touched them.
This example shows 4 minutes, 30 seconds.
Touch number pads for
the cooking time you
want.
The oven will automatically cook at high Cook
Power.
4.
Touch START.
d
count
own
The START and COOK CYCLE 1 Signal Lights
will come on to show what You have told
the oven to do. The START Light will go off in
about 5 seconds.
The Display counts down the time to show
how much cooking time is left.
When the cooking time ends, a buzzer will
sound 4 times. (You can stop the buzzer
by opening the oven door ortouching
CANCEL.) When the buzzer stops, the Dis-
play will show the time of day.
LOWER COOK POWERS
~__~~
For best results, some recipes call for lower Cook Powers. Lowering the Cook Power
slows the cooking. The lower the Cook Power, the slower the cooking. Each number
pad on your microwave oven stands for a different percentage of Cook Power. Many
recipes in Your MICRO MENUS, Cookbook tell You, by number, which Cook Power to
use. Recipes in other books and magazines may tell You by name (HI, MED, LO, etc.) or
by percentage (1 O%, 50%, 80%, etc.).
The following chart gives You the percentage of Cook Power each number pad
stands for, and the Cook Power name usually used.
-Tmk
automatic 100% of full power
HIGH
9 90% of full power
8
80% of full power
7 70% of full power
MED-HI
6
60% of full power
5 50% of full power
MED
z
40% of full power
30% of full power
MED-LO
2
20% of full power
1 10% of full power LOW
CONTINUED NEXT PAGE
7
