9
English
speed of the engine above the
level necessary.
3. Never operate the pruner at an
angle greater than 60° in order to
reduce the risk of being struck by
falling objects during operation.
4. If the unit start to shake or vibrate,
turn off the engine and check the
whole unit. Do not use it until the
trouble has been properly
corrected.
5. Keep all parts of your body away
from rotating cutting attachment
and hot surfaces.
6. Never touch the muffler, spark
plug, or other metallic parts of the
engine while the engine is in
operation or immediately after
shutting down the engine. Doing
so could result in serious burns or
electrical shock.
• IF SOMEONE COMES
1. Guard against hazardous
situations at all times. Warn adults
to keep pets and children away
from the area. Be careful if you are
approached. Injury may result from
flying debris.
2. If someone calls out or otherwise
interrupts you while working,
always be sure to turn off the
engine before turning around.
■ MAINTENANCE
1. In order to maintain your product
in proper working order, perform
the maintenance and checking
operations described in the
manual at regular intervals.
2. Always be sure to turn off the
engine before performing any
maintenance or checking
procedures.
(1) Check ok !
The metallic parts reach high
temperatures immediately after
stopping the engine.
3. When replacing the cutting
attachment or any other part, or
when replacing the oil or any
lubricant, always be sure to use
only ZENOAH products or
products which have been
certified by ZENOAH for use
with the ZENOAH product.
