ES-3124 User’s Guide
Chapter 34 Introducing Commands 237
Enter exit to quit from the current mode or enter logout to exit the command interpreter.
34.8 Getting Help
The system includes a help facility to provide you with the following information about the
commands:
• List of available commands under a command group.
• Detailed descriptions of the commands.
Config Commands available in this mode
allow you to configure settings that
affect the switch globally.
Type
config in
enable mode.
ras(config)#
Command modes that follow are sub-modes of the config mode and can only be accessed from within the config
mode.
Config-vlan This is a sub-mode of the config mode
and allows you to configure VLAN
settings.
Type
vlan followed by
a number (between 1 to
4094). For example,
vlan 10 to configure
settings for VLAN 10.
ras(config-vlan)#
Config-interface This is a sub-mode of the config mode
and allows you to configure port
related settings.
Type
interface
port-channel
followed by a port
number. For example,
i
nterface port-
channel 10
to
configure port 10 on the
switch.
ras(config-interface)#
Config-mvr This is a sub-mode of the config mode
and allows you to configure multicast
VLAN settings.
To enter MVR mode,
enter
mvr followed by
a VLAN ID (between 1
and 4094). For
example, enter
mvr 2
to configure multicast
settings on VLAN 2.
ras(config-mvr)#
Table 81 Command Interpreter Mode Summary (continued)
MODE .DESCRIPTION
HOW TO LOGIN/
ACCESS
PROMPT
