ES-3124 User’s Guide
Chapter 4 The Web Configurator 55
The following table describes the links in the navigation panel.
Table 5 Navigation Panel Links
LINK DESCRIPTION
Basic Settings
System Info This link takes you to a screen that displays general system and hardware
monitoring information.
General Setup This link takes you to a screen where you can configure general identification
information about the switch.
Switch Setup This link takes you to a screen where you can set up global switch parameters such
as VLAN type, MAC address learning, GARP and priority queues.
IP Setup This link takes you to a screen where you can configure the management IP
address, subnet mask (necessary for switch management) and DNS (domain name
server).
Port Setup This link takes you to screens where you can configure settings for individual switch
ports.
Advanced
Application
VLAN This link takes you to screens where you can configure port-based or 802.1Q VLAN
(depending on what you configured in the Switch Setup menu).
Static MAC
Forwarding
This link takes you to screens where you can configure static MAC addresses for a
port. These static MAC addresses do not age out.
Filtering This link takes you to a screen to set up filtering rules.
Spanning Tree
Protocol
This link takes you to screens where you can configure the STP/RSTP to prevent
network loops.
Bandwidth
Control
This link takes you to screens where you can cap the maximum incoming bandwidth
allowed on specified port(s).
Broadcast Storm
Control
This link takes you to a screen to set up broadcast filters.
Mirroring This link takes you to screens where you can copy traffic from one port or ports to
another port in order that you can examine the traffic from the first port without
interference
Link Aggregation This link takes you to a screen where you can logically aggregate physical links to
form one logical, higher-bandwidth link.
Port
Authentication
This link takes you to a screen where you can configure RADIUS (Remote
Authentication Dial-In User Service), a protocol for user authentication that allows
you to use an external server to validate an unlimited number of users.
Port Security This link takes you to a screen where you can activate maximum port security
through the use of configured static MAC addresses.
Classifier This link takes you to a screen where you can configure classifiers.
Policy Rule This link takes you to a screen where you can configure policy rules.
Queuing Method This link takes you to a screen where you can configure strictly priority or weighted
fair scheduling with associated queue weights for each port.
VLAN Stacking This link takes you to a screen where you can configure VLAN stacking.
Multicast This link takes you to a screen where you can configure various multicast features
and create multicast VLANs.
DHCP Relay This link takes you to a screen where you can configure DHCP relay information
and specify the DHCP server(s).
