ES-3124 User’s Guide
Chapter 8 VLAN 97
8.8 Create an IP-based VLAN Example
This example shows you how to create an IP VLAN which includes ports 1, 10 and 15. Follow
these steps:
1 Activate this protocol based VLAN.
2 Type the port number you want to include in this protocol based VLAN. Type 1.
3 Give this protocol-based VLAN a descriptive name. Type IP-VLAN.
4 Select the protocol. Leave the default value IP.
5 Type the VLAN ID of an existing VLAN. In our example we already created a static
VLAN with an ID of 5. Type 5.
6 Leave the priority set to 0 and click Add.
Figure 40 Protocol Based VLAN Configuration Example
To add more ports to this protocol based VLAN.
1 Click the index number of the protocol based VLAN entry. Click 1
2 Change the value in the Port field to the next port you want to add.
3 Click Add.
Priority This field shows the priority which is assigned to frames belonging to this protocol
based VLAN.
Delete Click this to delete the protocol based VLANs which you marked for deletion.
Cancel Click Cancel to reset the fields.
Table 18 Protocol Based VLAN Setup (continued)
LABEL DESCRIPTION
