NWA1300-NJ User’s Guide
21
CHAPTER 2
The Web Configurator
2.1 Overview
This chapter describes how to access the NWA1300-NJ Web Configurator and
provides an overview of its screens.
The Web Configurator is an HTML-based management interface that allows easy
setup and management of the NWA1300-NJ via Internet browser. Use Internet
Explorer 6.0 and later or Netscape Navigator 7.0 and later versions. The
recommended screen resolution is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled
by default in Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
Refer to the Troubleshooting chapter to see how to make sure these functions are
allowed in Internet Explorer.
2.2 Accessing the Web Configurator
1 Make sure your NWA1300-NJ hardware is properly connected and prepare your
computer or computer network to connect to the NWA1300-NJ (refer to the Quick
Start Guide).
2 The NWA1300-NJ’s Ethernet port is set to DHCP client mode by default. Make sure
the NWA1300-NJ is connected to a DHCP server. Check your DHCP server to know
the IP address assigned to the NWA1300-NJ by the DHCP server.
3 Launch your web browser.
4 Type the NWA1300-NJ’s IP address as the website address.
