Chapter 6 Administration
NWA1300-NJ User’s Guide
51
2 Run a TFTP server program and specify the location of the firmware file and the
communication mode. Refer to the documentation that comes with your TFTP
server program for instructions.
3 Access the web configurator. Refer to the section on accessing the web
configurator for instructions.
4 Click ADMINISTRATION > FIRMWARE.
Figure 14 ADMINISTRATION > FIRMWARE > Manual Firmware Upgrade: via TFTP
Server
5 Specify the IP address of the TFTP server in the Remote TFTP Server IP
Address field.
6 Specify the name of the firmware file in the File Name field.
7 Click Apply to start the file transfer process.
8 When the file transfer is completed successfully, the NWA1300-NJ automatically
restarts.
WARNING!
Do not interrupt the file upload process as this may
PERMANENTLY damage the device.
9 After the NWA1300-NJ finishes restarting, access the web configurator again.
Check the firmware version number in the SYSTEM STATUS screen.
6.4.3 Scheduled Firmware Upgrade
Click ADMINISTRATION > FIRMWARE > Scheduled Firmware Upgrade.
Configure the screen to automatically download the latest firmware from a TFTP
server.
