Chapter 8 Receiving Faxes 8-3
Receiving Faxes
Receiving Both Faxes and Telephone Calls
Automatically: Fax/Tel Mode
Set this mode if you only have one telephone line for fax and telephone use and want
your unit to automatically switch between fax and voice calls.
n
For this mode, you need to connect the optional handset or a telephone to your unit (1 p. 2-7).
Setting Fax/Tel Mode
Your unit is factory-set to Fax/Tel Mode. If you have not changed the receive mode to
FAX ONLY MODE or DRPD, simply follow this procedure:
1 Press Receive Mode repeatedly until
Fax/Tel Mode is displayed.
• After a few seconds, the LCD changes
Ex:
to this display:
If Fax/Tel Mode does not appear in the LCD when you press Receive Mode, follow
this procedure to set FAX/TEL AUTO SW (Fax/Tel Mode):
1 Open the one-touch speed dial panel.
2 Press Data Registration.
3 Press Set.
4 Use ∂ or ¨ to select RX SETTINGS.
5 Press Set.
6 Use ∂ or ¨ to select RX MODE.
7 Press Set.
Ex:
8 Use ∂ or ¨ to select FAX/TEL AUTO SW.
9 Press Set.
• To set the options for FAX/TEL AUTO SW
(Fax/Tel Mode), see the following pages.
10 Press Stop to return to standby mode.
Ex:
11 Confirm that FaxTel is displayed in the LCD.
Ex:
• If FaxTel is not displayed, press Receive Mode
repeatedly until Fax/Tel Mode is displayed. After
a few seconds, the LCD returns to standby mode.
12/27 FaxTel
12/27 FaxTel
RING START TIME
FAX/TEL AUTO SW
FAX ONLY MODE
RX MODE
ECM RX
RX SETTINGS
USER SETTINGS
DATA REGSTRATION
12/27 FaxTel
Fax/Tel Mode
