14-2 Summary of Settings Chapter 14
Understanding the Menu System
The unit menu system allows you to customize the way your unit operates. It consists
of seven menus, each containing settings that control different functions of your unit.
Before adjusting any settings, you may want to print the USER’S DATA LIST to check
the current settings (1 below).
Printing a List to Check the Current Settings
You can print the USER’S DATA LIST to check the current settings of your unit as well
as the registered sender information (1 p. 3-5).
Follow this procedure to print the USER’S DATA LIST:
1 Open the one-touch speed dial panel.
2 Press Report.
3 Use ∂ or ¨ to select USER DATA
LIST.
4 Press Set.
• The unit prints the USER’S DATA LIST.
The sender information is shown at the beginning of the list. The current settings of the
unit are listed after this.
****************************
****************************
*** ***
USER’S DATA LIST
1.USER SETTINGS
UNIT TELEPHONE # 123 4567
UNIT NAME CANON
TX TERMINAL ID
TTI POSITION OUTSIDE IMAGE
TELEPHONE # MARK FAX
SCANNING CONTRAST STANDARD
OFFHOOK ALARM ON
VOLUME CONTROL
CALLING VOLUME 2
KEYPAD VOLUME 2
ALARM VOLUME 2
LINE MONITOR VOL. 2
RX CALL LEVEL HIGH
TEL LINE TYPE TOUCH TONE
12/27/2001 17:23 FAX 123 4567 CANON 001
