Settings Menu
2-6
2
Printer Settings Menu
Settings Menu
Copies
1 to 2000; 1
*
This setting enables you to specify the number of copies printed. The default
setting is '1', but you can specify up to 2000 copies.
2-Sided Printing
On, Off
*
This parameter selects one-sided or two-sided printing. When 2-Sided Printing is
specified, the document is printed on both sides of the paper.
NOTE
•
Two-sided printing can use either the paper drawer or the stack bypass in sizes of
12" x 18", 11" x 17", 12_5/8" x 17_11/16", LGL, LTR, LTRR, STMT, STMTR, EXEC,
A3, JIS-B4, A4, A4R, JIS-B5, JIS-B5R, A5, and A5R.
•
Two-sided printing can use paper within the following range.
- 17 lb bond to 28 lb bond (64 to 105 g/m
2
)
•
When printing on letterhead paper, or paper with a logo (such as a cover sheet),
please note the following points:
- If the paper is fed from an internal paper drawer, the print surface of the first page
should be face down.
- If the paper is fed from the stack bypass or the optional paper deck, the print
surface of the first page should be face up.
