ID STORAGE SETUP, CONT.
3.PROMPT 1= (PR
enter up to 12 characters to refer to ENTER key to
save the new setting and return to the ID Storage Menu.
4.PROM
With th =
parameter will be shown. Note that XXXXXXXXXXXX is the current name. If the
setting displayed is ac
Otherwise, press the 4 key, the ENTER key and then using the alpha-numeric keys,
enter up to 12 characters to refer to the second prompt and then press the ENTER key
to the ID Storage Menu.
5.
etting displayed is acceptable, proceed to the next setup parameter.
meric keys,
enter up to 12 characters to refer to the third prompt and then press the ENTER key to
s return to the ID
ID
1. W to return
to
2. W row)
to
3. Press NEXT (Navigation Keys Down Arrow) to proceed to the SETUP MENU #2.
4. P
5. P eturn to normal
operations.
OMPT 1 NAME)
With the ID Storage Menu displayed the current setting for the PROMPT 1=
parameter will be shown. Note that XXXXXXXXXXXX is the current name. If the
setting displayed is acceptable, proceed to the next setup parameter.
Otherwise, press the 3 key, the ENTER key and then using the alpha-numeric keys,
the first prompt and then press the
PT 2= (PROMPT 2 NAME)
e ID Storage Menu displayed the current setting for the PROMPT 2
ceptable, proceed to the next setup parameter.
to save the new setting and return
PROMPT 3= (PROMPT 3 NAME)
With the ID Storage Menu displayed the current setting for the PROMPT 3=
parameter will be shown. Note that XXXXXXXXXXXX is the current name. If the
s
Otherwise, press the 5 key, the ENTER key and then using the alpha-nu
ave the new setting and Storage Menu.
Storage Setup Completed
ith the ID Storage Menu displayed, press EXIT (Navigation Keys UP Arrow)
the Mode Of Operation Menu.
ith the Mode Of Operation Menu displayed, press EXIT (Navigation Keys UP Ar
return to the SETUP MENU #1.
ress EXIT (Navigation Keys UP Arrow) to return to the SETUP/REVIEW MENU.
ress EXIT (Navigation Keys UP Arrow) to reset the indicator and r
8200-M538-O1 y 225 Installation
Page 77
