ID STORAGE OPERATION, CONT.
PERMANENT ID - Single Pass Transaction (One-Step Operation)
Loaded Container With Two ID Prompts
1. With the indicator in normal operations mode, place the loaded container on the scale
2. Press the ID key. The display will change to show ID1= (the Prompt 1 name entered
in ID Storage Setup).
string and press the ENTER key.
pt is needed, press the PRINT key to store the weight and print
lay Print Pass 2, and then display
ight will be added to the accumulator of the entered ID string and the ticket
Loaded Container With One ID Prompt
cale
mpt 1 name entered
d with the ID) then
dded to the accumulator of the entered ID string and the ticket
printed will show the TIME, DATE, ID, TIME/DATE of Stored Tare weight, the Gross,
Tare, and Net weights.
3. Enter up to a 12 digit alpha-numeric ID
4. The display will momentarily show REF= (and the name associated with the ID) then
change to ID2= (the Prompt 2 name entered in ID Storage Setup).
y If only one ID prom
the ticket. Proceed to Step 7.
5. If two ID prompts are required, enter up to a 12 digit alphanumeric string for the second
ID prompt.
6. Press the PRINT or ENTER key to store the tare weight and print the ticket.
7. The indicator will print a ticket, disp
Accumulating before returning to the Gross weight display.
8. The Net we
printed will show the TIME, DATE, ID, TIME/DATE of Stored Tare weight, the Gross,
Tare, and Net weights.
1. With the indicator in normal operations mode, place the loaded container on the s
2. Press the ID key. The display will change to show ID1= (the Pro
in ID Storage Setup).
3. Enter up to a 12 digit alpha-numeric ID string and press the ENTER key.
4. The display will momentarily show REF= (and the name associate
change to Print Pass 2, and then display Accumulating before returning to
the Gross weight display.
5. The Net weight will be a
8200-M538-O1 y 225 Installation
Page 87
