A SERVICE OF

logo

26
IDLE MODE
Idle mode is entered through setup code 2.
During idle mode the device performs the same tasks as when
it is in control mode except for the relays. The alarm relay is
activated (no alarm condition), the control relays are not
activated while the analog output remains activated.
When the instrument is in idle mode the red and green status
LEDs are on.
Idle mode is useful to disable control actions when the exter-
nal devices are not installed or when the user detects unusual
circumstances.
Control actions are stopped as soon
as the user presses SETUP and enters
the password.
In order to reactivate the control mode, use code 02 of setup
(see “Setup” section). Otherwise, the meter remains in idle
mode.