1-12 Parts Overview
11 Pinch rollers — grip the media during loading and
printing.
12 Pinch roller adjustment lever — allows you to adjust
the force or release the pinch rollers to feed rigid cut-
sheet media.
13 Rigid media sensor — detects whether rigid media is
loaded.
14 Capping station — protects the printheads from drying
out while idle (not printing) for extended periods.
15 Handle — for pulling the printer on its casters and lift-
ing the end of the printer.
16 S ta nd — supports the printer.
17 Casters (four places) — enables easy relocation of the
printer, can be locked in place.
18 Leveling pads (four places) — allows the printer to be
stabilized and leveled for consistent media feeding.
19 Docking station — holds the profilers, one for each ink
box, that track ink and cleaning solvent usage, and
identify ink characteristics for the RIP.
20 Off-Head System (OHS) — ink boxes, electronics, vac-
uum (to maintain negative head pressure), and pres-
sure (for purging the printheads) that provide ink and
cleaning solvent for cleaning the printheads.
21 Ink filters — user replaceable, one for each ink supply;
filters out impurities from the ink or cleaning solvent
prior to being sent to the printheads.
22 Ink boxes — each box holds 3 liters of ink or solvent
cleaning solution.
23 Power connection — inlet connects the printer to elec-
trical power. Power outlet provides power to the
optional auxiliary dryer.
24 Standby power switch — places printer in standby
mode (to disconnect from power, remove the power
cord).
25 VideoNet port — connects printer to print server.
26 Vacuum/Pressure (VP) assembly — provides vacuum
and pressure to the OHS and printheads.
Index Description
