Version 1.2 Page 51 4/22/04
Parameters
[test] Each test can be set or cleared:
booting_valid Enable/disable system firmware response to BOOTING bit. If OS
Speedy Boot aware set to on.
early_cpu Enable/disable early CPU self tests
late_cpu Enable/disable late CPU self tests
platform Enable/disable system board hardware tests.
chipset Enable/Disable chipset tests
boottest command
Shell> boottest
BOOTTEST Settings Default Variable
OS is not speedy boot aware.
Selftest Setting
--------- --------------
early_cpu Skip this test
late_cpu Skip this test
platform Skip this test
chipset Skip this test
io_hw Skip this test
mem_init Skip this test
mem_test Skip this test
cpuconfig
Cpuconfig displays the CONFIG/DECONFIG state of processors in the systems and allows the user to
configure or reconfigure processors.
cpuconfig command
Shell> cpuconfig
PROCESSOR MODULE INFORMATION
# of L3 L4 Family/
CPU Logical Cache Cache Model Processor
Slot CPUs Speed Size Size (hex.) Rev State
---- ------- -------- ------ ------ ------- --- ------------
0 1 900 MHz 1.5 MB None 1F/00 B3 Active
1 1 900 MHz 1.5 MB None 1F/00 B3 Active
default
Allows the user to restore NVM to default values and clear NVM storage values.
