Version 1.2 Page 70 4/22/04
Exit the Boot Bios utility and refresh the Device mapping table by executing the EFI shell command
“map”. You should see the created boot device option and proceed to boot OpenVMS for Industry
Standard Servers.
Booting on MultiPath devices
MultiPath
Fibre channel devices that have multiple paths (MultiPath) will be done by configuring the EFI boot
manager and setting the two unique fibre channel paths on the boot menu. If the first path fails, the EFI
boot manager automatically uses the second path on the boot menu to boot the OpenVMS operating
system.
Example 7:
Adapter 1: S_ID:021E00 PCI Bus#: 60 Dev#: 01 Func#: 00
LP9802: I/O Base: 6000 Firmware Version: HS1.00X6
Port Name: 10000000 C93106F4 Node Name: 20000000 C93106F4
Topology: AUTO (start with FCAL). - default
Here are lun numbers 1 thru 3:
Lun index number Mode Mode Lun#
1 peripheral dev 13
2 peripheral dev 14
3 peripheral dev 101
Enter Lun number from 1 to 3 to select LUN for booting.
Enter 0 to Return to boot list menu; No changes made.
Valid entries are zero, numbers 1 through 3.
1
Adapter 1: S_ID:021E00 PCI Bus#: 60 Dev#: 01 Func#: 00
LP9802: I/O Base: 6000 Firmware Version: HS1.00X6
Port Name: 10000000 C93106F4 Node Name: 20000000 C93106F4
Topology: AUTO (start with FCAL). - default
Selected Boot Device:
DID:011100 WWPN:50001FE1 0011B158 LUN: 13
1. Boot this device via WWPN.
2. Boot this device via DID.
0. Return to previous menu.
Enter your selection. Valid entries are 0 thru 2: 1
5. Unused DID:000000 WWPN:00000000 00000000
