bizhub C652/C652DS/C552/C452 4-21
4.3 Windows 2000
4
Installing the printer driver manually using the Add Printer Wizard
0 Installing the driver to Windows 2000-based computers requires the administrator authority.
1 Insert the printer driver DVD-ROM into the DVD-ROM drive of the computer.
2 Press the [Start] key, and then select "Settings" - "Printers".
3 Double-click the "Add Printer" icon.
"Add Printer Wizard" starts.
4 Click [Next].
5 In the "Local or Network Printer" page, select "Network printer", and then click [Next].
6 In the "Locate Your Printer" page, select "Connect to a printer on the Internet or on your intranet".
7 In the "URL" field, enter the URL for the machine in the following format, and then click [Next].
% http://<IP address for the machine>/ipp
Example: When the IP address for the machine is 192.168.1.20, http://192.168.1.20/ipp
% When specifying to use IPPS printing, enter "https://<IP address for the machine>/ipp".
8 When the confirmation dialog box appears, click [OK].
9 Click [Have Disk].
10 Click [Browse].
11 Select a desired printer driver folder in the DVD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used.
Selectable printer drivers:
PCL driver, PS driver and fax driver
12 Click [OK].
The "Printers" list appears.
13 Click [OK].
14 Follow the instructions on the pages that follow.
15 Click [Finish].
% If the "Digital Signature" window appears, click [Yes].
16 After finishing the installation, make sure that the icon for the installed printer is displayed in the
"Printers" window.
17 Remove the DVD-ROM from the DVD-ROM drive.
This completes the printer driver installation.
Once the settings for the printer have been configured, you can use the printer in the same way as a general
local printer.
