A SERVICE OF

logo

*XXXXXXXXX*
*XXXXXXXXX*
6. Note the location of the memory modules, remove them from the failing
system board, and install them on the new system board in the same location
as they were on the failing system board. See “Removing and replacing
memory” on page 96.
7. Remove the heat sink and microprocessor from the failing system board and
install them on the new system board. See “Removing and replacing the
microprocessor” on page 103.
Continue to the next step after installing the heat sink and microprocessor on
the new system board.
8. Install the new system board by aligning the slots in the metal plate on the
bottom of the system board with the tabs on the chassis and slide the system
board toward the rear of the computer until the screw holes are aligned
properly.
*XXXXXXXXX*
*XXXXXXXXX*
102 Hardware Maintenance Manual