MPC Setup Considerations Chapter 3
MPC User Manual Rev 0D 19
CAUTION
No warranty is made that the MPC will meet its performance specifications if a non-NovAtel antenna
is used.
3.2 Rear Panel Functionality
The connections on the rear panel and their connector types are shown on Figure 3.
Figure 3: Close-up of Connectors on Rear Panel
Each connector is keyed to ensure that the cable can be inserted in only one way, to prevent damage to
both the MPC and the cables. Furthermore, the connectors that are used to mate the cables to the MPC
require careful insertion and removal. Observe the following when handling the cables.
ยท To insert a cable, make certain you are using the appropriate cable for the port - the serial
cable has a different connector (DB9) than the GPS Antenna In (TNC), or the Modem
(RJ11), or the Ethernet (RJ45) connectors.
WARNING: DO NOT PULL DIRECTLY ON THE CABLES.
TNC
DB9
RJ45
RJ11
BNC
