60 MPC User Manual Rev 0D
Chapter 6 Software Programs
CONFIGURE PPP PORT
An example of the Configure PPP Port window is shown in Figure 56.
Figure 56: Configure PPP Port
First enter the user name and password the MPC will use to ‘connect’ to the PPP host in the User
Name and Password fields. Then enter the number of redial attempts you would like the MPC to make
and choose a length of time between these attempts.
Choose how long, or never, to wait while the connection is idle before the MPC should hang up.
Select to enter the IP address for the direct connection in the Set IP field, or select Obtain an IP
Automatically for the IP address to be assigned automatically.
Click on the OK button to save your changes or click on the Home button to cancel the settings return
you to the Modulated Precision Clock home page.
* Some of these parameters can also be adjusted via the VFD panel on the MPC.
