Basic Copying
16
The DP-C106 detects original sizes in either inches or millimeters. The table
below lists the various paper sizes that the DP-C106 can automatically detect
when configured to inches and to millimeters.
For information on changing the copier configuration between inches and
millimeters, go to the Tools Mode.
LEF = Long Edge Feed; SEF = Short Edge Feed
Inch Configuration Metric Configuration
8.5 x 11 in. (SEF/LEF) B5 (SEF/LEF)
8.5 x 14 in (SEF) A4 (SEF/LEF)
11 x 17 in. (SEF) B4 (LEF)
A3 (SEF)
A5 (LEF, EU only)
You must manually select the Paper Supply for documents that do not fall
within the sizes listed in the table and for documents that are difficult to detect,
such as transparencies and tracing paper. If the copier cannot detect the size
of your original, an error message appears on the Copier Screen. The error
message appears each time you attempt to copy the original until you
manually select the appropriate Paper Supply.
For directions on using the Paper Supply button, go to the Copy Features.
