Tools Mode
58
Auto Mode Change
The DP-C106 can enter copy mode when originals are loaded into the ADF or
the ADF is opened if the Auto mode change feature is set to Copy. You do
not need to press the Copy button to enter Copy Mode.
For further information on using the Copy button to enter copy mode, go to
the Basic Copying.
Use the following procedure to access the Auto Mode Change option:
1. Press the Tools button to display the Tools Main Menu on the Copier
Screen.
2. Using the ( ) ARROW buttons highlight the Admin menu selection.
3. Press the Select button. Password Input is displayed on the Copier
Screen.
4. Using the Numeric Keypad, enter your Administrator Password. The
numbers displays as asterisks (*).
If you make a mistake while entering a password, press the Clear button.
5. Once the correct password is entered, the Administrator Menu is
displayed on the Copier Screen.
6. Use the ( ) ARROW buttons to highlight the Auto mode change
selection.
7. Press the Select button. Auto mode change selection is displayed on
the Copier Screen.
8. Use the ( ) ARROW buttons to highlight one of the following:
• Off to switch the Auto mode change feature Off. Copy mode can
only be entered by pressing the Copy button.
• On to switch the Auto mode change feature On. The Copier/Printer
enters copy mode when originals are loaded into the ADF or the
ADF is open.
9. Press the Select button. The Administrator Menu is displayed on the
Copier Screen.
10. Press the Exit button. The Tools Main Menu is displayed on the Copier
Screen.
11. Press the Tools button to exit Tools Mode.
