Polycom
®
RealPresence DMA
®
7000 System Overview
Polycom, Inc. 22
The table below lists the remote ports to which the Polycom RealPresence DMA system may connect,
depending on signaling and security settings, integrations, and system configuration.
8444 TCP HTTPS. Supercluster communication.
8989 TCP LDAP. OpenDJ replication (superclustering).
9090 TCP HTTPS. Upgrade status monitoring (only while upgrade process is
running).
36000-61000 TCP Ephemeral port range.
Port Protocol Description
80 TCP HTTP. MCUs, Exchange Web Services (calendaring). Only used if
unencrypted connections are enabled (see Security Settings on page 50).
162 TCP/UDP SNMP notifications (Traps or Informs). Only used if SNMP is enabled and
configured to send notifications (see Configure SNMP on page 420).
389 TCP LDAP. Active Directory integration.
443 TCP HTTPS. MCUs, Exchange Web Services (calendaring).
1718 UDP H.323 RAS. Default port; can be changed (see Signaling Settings on
page 72).
1719 UDP H.323 RAS. Default port; can be changed (see Signaling Settings on
page 72).
1720 TCP H.323 H.225 signaling. Default port; can be changed (see Signaling
Settings on page 72).
3268 TCP Global Catalog. Active Directory integration.
3269 TCP Secure Global Catalog. Active Directory integration.
4449 TCP OpenDJ replication (superclustering).
5060 TCP/UDP Unencrypted SIP. Default port; can be changed or disabled (see Signaling
Settings on page 72).
5061 TCP SIP TLS. Default port; can be changed (see Signaling Settings on
page 72).
8443 TCP HTTPS. Management interface access.
8443 TCP HTTPS. Hourly transmission of system usage data to the address
customerusagedatacollection.polycom.com. This data is only sent if the
Automatically Send Usage Data feature is enabled (see Automatically
Send Usage Data on page 85).
8444 TCP Supercluster communication.
Port Protocol Description
