CABLE BOX SETUP
This setup applies only when all channels are received through a
cable box. In this case, the VCR will automatically enter the
channel used to view cable box programming. Your VCR will use
this channel for all future timer recordings.
I. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recodings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
B Language
0 Exit
2. Press 4 to display the CHANNELS menu.
3.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
5 Cable Box getup
0 Exit
Press5 to displayCABLE BOX SETUP.Then select
one ofthe threechoices:
4.
CABLE BOX SETUP
go you use your cable
box to receive ALL
channels or only SOME
channels?
1 ALL channels
2 Only SOME channels
3 Cancel setup
If you selected ALL channels, enter the output channel of
your cable box (usually 03 or 04), or press iNPUT for the VCR's
video line input ]f you use AUDIO/VIDEO jacks. When
finished, press MENU.
Cable Box Setup
ALL channels: enter two numbers for
output channel of your cable box or
press INPUT if you connect your cable
box with AUDIO/VIDEO jacks.
Only SOME channels: if you only use
the cable box to tune premium
channels.
CanceJ setup: select to cancel.
9
