4. Press FORWARD to search ahead or REVERSEto search
behind.
5. PressSTOP to end Go-To searching.
TRACKING
Your VCR has automatic tracking which removes interference like
streaks or "snow" from the picture. Automatic tracking is
automatically activated when you insert a tape or turn on the
VCR. Occasionally you may need to manually adjust tracking,
especially if the tape was recorded on a different VCR. Just use
the TRACKING buttons to reduce the distortion. You can also use
tracking when you pause a tape to reduce jittering of the
picture.
When you manually adjust the picture, automatic tracking is
turned off. To turn automatic tracking back on, press both
TRACKING buttons on the front of the VCR at the same time, or
eject the tape and re-insert it. Tracking has no effect during
recording- only playback.
GO-TO SEARCH
Current tape counter is
2:17:25
Press REV or FWO
to go to -:--:00
Press SEARCH to exit.
GO-TO SEARCH
Current tape counter is
2:1T:25
Press REV or FWD
to go to O:O0:O0
Press SEARCH to exit.
PRO-TECT PLUS TM LOCKING FEATURE
To disable the usage of the VCR, or to protect your timer
recordings, you can lock the VCR so that the buttons on the
VCR or remote won't work.
• To Lock: Press and hold the VCR button on the remote
for approximately six seconds. SAFEappears.
• To Lock While a Timer Recording is in Progress: Press
and hold the VCR button on the remote for approximately
six seconds.
• To Unlock: Press and hold the VCR button on the remote for
approximately six seconds.
TIME COUNTER
The time counter shows the actual time it takes to record a
program or play back a segment of a recorded tape. It helps
locate the beginning or end of programs you taped. The time
counter resets to 0:00:00 whenever the tape is ejected from
the VCR.
Locking Your VCR
If a timer recording is programmed,
make sure your VCR isturned off.
Locking your VCR prevents the VCR
from being accidentally turned on.
Continued on Next Page
49
