VCR PLUS+
Ente_ PtusCode Number
(from TV listing)
.
Press MENU to cancel
Enterthe VCR PlusCode ®programming number shown in
your local television guide.
gCg PLUS+
Enter PlusCode Number
(from rv listing)
12876-
Press CLEAR to correct
Press MENU when done
4. Press MENU to enter the PlusCode system number.
Mow often should this
program record?
I One time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
0 Cancel
5. indicate how often you want the program to be recorded.
6.
Program I (One time)
Channel 03 Cable
Start Time 08:00 PM
End Time 09:30 PM
Start Date 11/18/99 Thu
Tape Speed SLP
Press CLEAR to adjust
Press MENU to save
Change the recording speed with the SPEED button on the
remote or the program end time with the CLEAR button on
the remote (if necessary}.
Changing the end time comes in handy when you are
recording a program, such as a sporting event, that may
exceed the scheduled broadcast time.
7. Press MENU to save the program.
PlusCode is a registered trademark of the Gemstar Development Corporation
The VCRPlus+system is manufactured under the/icense from Gemstar Development Corporation
Recording with the
VCR Plus+ SILVER System
The clock must be set correctly for
VCRPlus+ programming to work.
Insert a tape with the safety tab in
place and enough tape to record the
program.
The TIMER indicator appears in the
display when you turn off the VCR
and a timer recording has been set. it
flashes if there is no tape in the VCR.
PROGRAMS OVERLAP appears if you
have entered two programs where
the times overlap.
UNRECOGNIZED NUMBER... PLEASE
RE-ENTERappears when the VCR does
not recognize the PlusCode
programming system number.
Timer recordings will not be lost in
the event of an extended power
outage.
3)
