USING TWO VCRS FOR COPYING AND
EDITING TAPES
Use one VCR as the playback VCR and the other asthe
recording VCR.
1. Connect the VCRs using the diagram at the right.
2. Turn on both VCRsand TV.
3. Tune the TV to the VCR viewing channel (either 3, 4, or TV's
video input). (See page 68 for more information)
4. If you are using coaxial cables for the connection, tune
recording VCR to channel 3 or 4--the one selected on the
playback VCR
If you are using audio/video cables, select the line input on
the recording VCR
5. Insert the tape you want to copy into playback VCR. Insert a
blank tape with its safety tab in place into recording VCR
6. Using visual search, locate the segment you want to copy on
the playback VCR. Pause the tape at this location
7. Press RECORD on the recording VCR,then PAUSE
8. Press PAUSE on both VCRsto begin copying
9. Press PAUSE on both VCRs to stop copying
10. Repeat steps 6-9 to copy or edit additional segments.
Caution:
The unauthorized recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.
Two VCR Connection
CABLE BOX
PLAYBACKVCR
RECORDtNG VCR
_1- OR.-_
TO TV TO TV
1
36
