Marley
/
MD Cooling Tower
/
4
■ Water Distribution System
Pressurized spray system distributes water evenly over the fill
Low-clog polypropylene nozzles—delivers precise distribution of water over the fill area
Marley MC thermoformed PVC film fill assembled into packs for ease of removal and cleaning
Marley XCEL drift eliminators—limit drift losses to no more than .001% of the design GPM flow rate
■ Structure
Induced-draft, counterflow design may require less plan area than crossflow towers typically use
Series 300 stainless steel, 316 stainless steel or heavy mill galvanized steel construction
Factory assembled—ensures final field installation will be hassle-free
Triple-pass PVC inlet louvers—limits splash-out and
eliminate sunlight from entering the collection basin
■ Air Movement Package
High efficiency fan—wide-chord design for maximum efficiency at low fan tip speeds
Eased inlet fan cylinder—ensures full area, low turbulent airflow through the cylinder
Spherical roller bearings are rated at an L
10
life of 100,000 hours
TEFC Fan Motor—1.15 service factor, variable torque, and specially insulated for cooling tower duty
The MD Series air movement package including the structural support—guaranteed against failure for a
period of five full years. The motor is warranted separately by the motor manufacturer
