www.wegener.com 800092-01 Rev. A 25
Unity 552 User’s Manual
Setup Audio
Use following steps to display Audio Setup screen on the OSD menu:
1. Navigate to the Unit Setup screen, see Unit Setup screen on page 23.
2. Press the down arrow button to select Audio Setup.
3. View the details as shown in Figure 3.15.
Figure 3.14: iPump 562 OSD Audio Setup
Use the Audio Setup screen to set and display the audio output options.
Table 3.8: Audio Output Options
Composite Out NTSC_M, NTSC_J, PAL/50 or
PAL/60
Selects video output format
Component Out 480i, 480p, 576i, 576p, 720p or
1080i
Selects video output format. When a DVI/HDMI device
is connected, the mode shall be automatically set to
Slave.
Component V-Refresh 50 or 60 or 59.94 Configures the video/vertical refresh rate
HDMI Out - Displays current display mode of the DVI/HDMI device
after EDID negotiation.
Option Possible values Comments
Option Possible values Comments
Audio Port 1 or 2
Audio Language A01 or ***
Audio Routing Stereo or Left/Right on both May be used for two languages
Audio Attenuation 0 through 20
S/PDIF Mode Passthru, Linear PCM or Off
