A SERVICE OF

logo

Open as PDF
next previous
www.wegener.com 800092-01 Rev. A 33
Unity 552 User’s Manual
2. Press the down arrow button to select Current Quality.
3. View the details as shown in Figure 3.24.
Figure 3.24: iPump 562 OSD Current Quality
History This Setting screen
Use following steps to display the History This Setting screen on the OSD menu:
1. Navigate to the Signal Quality screen. See Signal Quality screen on page 32
OR from a Signal Quality sub-screen, press the left arrow button to go back to the
Signal Quality screen.
2. Press the down arrow button to select History This Setting.
3. Press Enter.
4. View the details as shown in Figure 3.25.
Figure 3.25: iPump 562 OSD History This Setting