3. When the terminal is pushed into the receptacle
as far as it will go, push down the edge of the
surface unit opposite the receptacle.
Reflector bowls reflect heat back to the utensils
on the surface units. They also help catch spills.
When they are kept clean, they reflect heat better
and look new longer.
If a trim ring gets discolored, some of the utensils
may not be flat enough, or some may be too large
for the surface unit. In either case, some of the
heat that’s meant to go into or around a utensil
goes down and heats the trim ring. This extra heat
can discolor it. See Cooking Guide for further
information.
Lift-up cooktop
1. Lift front of cooktop at the center and swing the
support rod up.
2. Carefully lower the cooktop onto the support
rod. Be sure the tip of the rod fits in the notch in
the cooktop.
Personal Injury and Product Damage Hazard
Be sure the rod fits in the notch in the
cooktop and
is
held securely. The cooktop
could accidentally fall and injure you. Do not
drop the cooktop. Damage can result to the
porcelain and the cooktop frame.
3. Wipe surface under the cooktop with warm
soapy water. Use a soap-filled plastic scouring
pad on heavily-soiled areas.
