ES-2108 Series User’s Guide
Chapter 30 Introducing Commands 191
bandwidth-
control
Displays bandwidth control
settings on the port(s).
13
egress
Displays outgoing port information
on the port(s).
13
bstorm-control
Displays broadcast storm control
settings on the port(s).
13
igmp-immediate-
leave
Displays IGMP immediate leave
settings on the port(s).
13
igmp-filtering
Displays IGMP filter profile
settings on the port(s).
13
igmp-group-
limited
Displays IGMP group settings on
the port(s).
13
igmp-query-mode
Displays IGMP query mode
settings on the port(s).
13
vlan
Displays the status of all VLANs. 13
<vlan-id>
Displays the status of the
specified VLAN.
13
running-config
Displays current operating
configuration.
13
help
Displays detailed information and
parameters for this command.
13
interface port-
channel <port-
list>
[bandwidth-
limit...]
Displays current operating
configuration on a port by port
basis. Optionally specifies which
settings are displayed.
13
timesync
Displays time server information. 13
time
Displays current system time and
date.
13
garp
Displays GARP information. 13
loginPrecedence
Displays login precedence
settings.
13
logging
Displays system logs. 13
ssh
Displays general SSH settings. 13
known-hosts
Displays known SSH hosts
information.
13
key
<rsa1|rsa|dsa>
Displays internal SSH public and
private key information.
13
session
Displays current SSH session(s). 13
https
Displays the HTTPS information. 13
session
Displays current HTTPS
session(s).
13
certificate
Displays the HTTPS certificates. 13
key <rsa|dsa>
Displays the HTTPS key. 13
Table 73 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION LEVEL
