ES-2108 Series User’s Guide
202 Chapter 30 Introducing Commands
timesync <daytime|time|nt
p>
Sets the time server protocol. 13
server <ip>
Sets the IP address of your
time server.
13
loginPrecede
nce
<LocalOnly |
LocalRADIUS |
RADIUSOnly>
Select which database the
switch should use (first) to
authenticate a user.
14
queue priority <0-7>
level <0-3>
Sets the priority level-to-
physical queue mapping.
13
storm-
control
Enables broadcast storm
control on the switch.
13
bandwidth-
control
Enables bandwidth control. 13
mac-aging-
time
<10-3000>
Sets learned MAC aging time. 13
snmp-server get-community
<property>
Sets the get community. 13
set-community
<property>
Sets the set community. 13
trap-community
<property>
Sets the trap community. 13
trap-destination
<ip>
Sets the IP addresses of up to
four stations to send your
SNMP traps to.
13
[contact <system
contact>]
[location
<system
location>]
Sets the geographic location
and the name of the person in
charge of this switch.
13
logins username <name>
password <pwd>
Configures a default (read-
only) account.
14
username <name> privilege <0-
14>
Assigns a privilege level to
user accounts.
14
service-
control
icmp
Allows ICMP access for
services such as Ping.
13
snmp
Allows SNMP management. 13
http <socket-
number>
<timeout>
Allows HTTP access on the
specified service port and
defines the timeout period.
13
telnet <socket-
number>
Allows Telnet access on the
specified service port.
13
ftp <socket-
number>
Allows FTP access on the
specified service port.
13
Table 74 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION
PRIVILEG
E
